---
title: "Integrating Pressac"
slug: "integrating-pressac"
updated: 2024-01-16T18:27:59Z
published: 2024-01-16T18:27:59Z
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.nexudus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Integrating Pressac

## What you need to integrate Pressac

### One or more Pressac sensors

If you haven't purchased any Pressac sensor yet, head over to [pressac.com](https://www.pressac.com/). The Pressac team will help you through the purchase and setup of the sensors in your space.

### One or more AWS IoT certificates for your Pressac sensors

          You need 1 endpoint certificate per location using Pressac sensors.

          

*If you have 3 locations using Pressac sensors, you'll need 3 AWS IOT certificates.*

You have **two options** to create an AWS IoT endpoint and the matching certificates:

- **Have Nexudus create them for you**

This is the easiest option — all you have to do is [contact support](https://help.nexudus.com/docs/contacting-support) and let our team know how many endpoint certificates you need.

- **Create your own**

If you'd like to create AWS IoT endpoints using your own AWS account, you can do so. This setup requires a bit more work, but you'll host all the sensor data under your own domain. For more details, check out [Creating your own AWS IoT Endpoint for Pressac](/v3/docs/creating-your-own-aws-iot-endpoint-for-pressac).

---

## Integrate Pressac

Once you have your endpoints and certificates either through us or your own AWS account, all you need to do is enable the AWS IOT service in Pressac using your AWS details.

1. Go to your Pressac admin panel and log in.
2. Click **Connections > AWS IoT** in the navigation menu.
3. Add the details the Nexudus team shared with you in each corresponding field:

- **Connection**
- **Root Topic**
- **Device Identifier**
- **Endpoint**
- **Certificate**
- **Private Key**
- **CA Certificate**
- **Included Data**
- **Timestamp**
- **Device Name**
- **Device ID**
- **Device Type**
- **Gateway Name**
- **Device Location**
- **Device Values**
- **Device Values Unit**
- **Signal Strength(dBm)**
- **Security**

1. Click **Save**.

---

All set! You're now ready to use your Pressac's sensor data in Nexudus.